Specification:

Technical Parameters

● Working temperature：-20~55℃

● Supply voltage：DC12V~24V

● Output：2 Channel(2Channel signal are the same)

● Connection mode：Common anode

● Controller size：L85×W45×H23mm

● Net weight：88g

● Static power consumption：<1W

● Output current：<4A/CH

● Output power：12V:<96W；24V:<192W

The RF touch Single color led dimmer adopt the RF wireless remote control,can adjust brightness infinitely to change the lights brightness according to the customer’s preference.

Dimension:

Direction for use

● Function introduction：

1、Use the RF remote control, no need to make the remote direct to the controller,and the RF remote can controlled it across obstacles.

2、In the open area remote control distance is over 30 meters;

3、Each controller and the remote are stick with an unique ID on it,each controller can be study two remote control’s ID,this means one controller can be controlled by two remote at the same time.Besides,this controller can make it to be controlled by the unique remote , or make one remote to controlled many controller as well.(remarks:need to make to order)

● Operation method:

1.Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power；

2.Adopt wireless 433.9mhz RF Touch 5 keys remote control, its function as follows:

Application：